HPE EVA Storage
1748113 Members
3435 Online
108758 Solutions
New Discussion юеВ

Re: Licenses in HP P6000 CommandView

 
SOLVED
Go to solution
EvgeniyK
Occasional Advisor

Licenses in HP P6000 CommandView

Hello, all!

After install new version CommandView10.2 tab "Licensing" indicated:

Business Copy - 0 GB - 0 GB - Expires in 60 days
Continuous Access - 0 GB - 0 GB - Expires in 60 days
Performance Advisor - 0 GB - N/A - Expires in 60 days.

 

In old Command View (version: 10.1.0.120411) those look like this:
Business Copy - 0 GB - 0 GB - Not licensed
Continuous Access - 0 GB - 0 GB - Not licensed
Performance Advisor - 0 GB - N/A - Not licensed
The question is: how make new one like this?
New Command View version is: 10.2.0.121112

Thanks.

3 REPLIES 3
Greybeard
Esteemed Contributor
Solution

Re: Licenses in HP P6000 CommandView

Hi a new install will come with the temp setup licenses, after the 60 day trial the unlicensed features will again look like the old version. Any features or capacity licenses you had must be re installed in order for those features to continue functioning.
_________________________________________________
How to assign points on this new forum? Click the Kudos Star!
EvgeniyK
Occasional Advisor

Re: Licenses in HP P6000 CommandView

Thanks for help.

Greybeard
Esteemed Contributor

Re: Licenses in HP P6000 CommandView

you're welcome, don't forget if this answered your question to mark as solved so others can find the answer too :)
_________________________________________________
How to assign points on this new forum? Click the Kudos Star!