HPE EVA Storage

Lun from Win2003 to Win 2008 Host of EVA4k

 
SOLVED
Go to solution
chindi
Respected Contributor

Lun from Win2003 to Win 2008 Host of EVA4k

Hi ,

 

We are not able to access H: drive of Win 2003 Server which is given a lun from EVA4K , due to some controller error .

Can we present this lun to another host which is Win 2008 in same san fabric and access the contents from it ??

 

 

 

p.S. this thread has been moved from Disk Array to Storage Area Networks (SAN) (Enterprise). - Hp Forum moderator

4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: Lun from Win2003 to Win 2008 Host of EVA4k

>> due to some controller error

 

A controller inside the server?

 

You can present the LUN to another server, but make sure only a single server has access to the LUN at a time.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
chindi
Respected Contributor

Re: Lun from Win2003 to Win 2008 Host of EVA4k

Hi,

Event ID 11, Disk: The driver detected a controller error on \Device\Harddisk0

chindi
Respected Contributor

Re: Lun from Win2003 to Win 2008 Host of EVA4k

Hi ,
After trying to present to another server , i do not get bring to online , mount option.
Am getting only initialize option .
Please suggest

 

One more thing my SAn port is not showing online status for this host .

Do i need to check fc cable / port for the same ?

chindi
Respected Contributor
Solution

Re: Lun from Win2003 to Win 2008 Host of EVA4k

Changed HBA card .

All is fine now .