HPE EVA Storage

MPIO for EVA installed still am seeing 2 HDD on Host

 
Fenny_1
Super Advisor

MPIO for EVA installed still am seeing 2 HDD on Host

Hi,

I have presented a vdisk from EVA4400 and installed MPIO for EVA on my windows 2003 server.

After installing MPIO i should see one HDD instead of 2. But am still having 2 HDD in my disk managment.

Please guide me how can i resolve this issue
4 REPLIES 4
Víctor Cespón
Honored Contributor

Re: MPIO for EVA installed still am seeing 2 HDD on Host

What version of MPIO have you installed?
What do you see in Device Manager? How many HSV300 disk devices, and how many HSV300 Multipath disk devices?
Thomas J. Harrold
Trusted Contributor

Re: MPIO for EVA installed still am seeing 2 HDD on Host

Latest version of the MPIO (full featured) tool can be found here: (4.01.01)


http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=421494&prodTypeId=18964&prodSeriesId=421492&swLang=13&taskId=135&swEnvOID=1005

Hope that helps.
I learn something new everyday. (usually because I break something new everyday)
Fenny_1
Super Advisor

Re: MPIO for EVA installed still am seeing 2 HDD on Host

Hi,
I have used the the version MPIO v4.0.0 i think this one is one version behind the latest version.
Marcus Schack
Trusted Contributor

Re: MPIO for EVA installed still am seeing 2 HDD on Host

What is your zoning set up? Do you have two fabrics? Each only visible to one of the HBAs and to two of the EVA4400 controller ports?