MPX 110

 
Andrew Hellyer
Advisor

MPX 110

Since upgrading the firmware on my MPX110 devices, I am unable to connect via MPX Manager.
We have four in total, and all of them experienced this issue, however only two still have the problem.
You can ping the mgmt interface - but thats about it...
I have tried a factory reset (via the serial) but to no avail.
I would like to reflash the firmware if possible. Is using TFTP possible?
Is there any other ways of reflashing 'firmware' onto these things if it goes bad?
2 REPLIES 2
Sivaramakrishna_1
Honored Contributor

Re: MPX 110

Which version u upgraded. Are u able to telnet to that modules.

If Telnet and FTP will be enabled, then u can reflash the same else the option is to replace the modules i suppose.

below would be the steps: (if ftp and telnet working)
1. ftp to mpx modules (using user->ftp and password->ftp) and put the firmware image file

2. Telnet to that module and and run "image unpack

But i wont sugget downgrade the firmware rather suggest to involve HP support
Andrew Hellyer
Advisor

Re: MPX 110

I cannot FTP or telnet to the devices.
The only way to manage them now is via a serial cable!