HPE EVA Storage

MSA 2012i Controllers Failing

 
Plazmitron1999
Occasional Advisor

MSA 2012i Controllers Failing

Good Day!

I am the lucky owner of an old MSA2012i. And I have some problems with firmware J212P01(A) for my MSA2012i! 

I installed the firmware J212PO1(A) on MSA2012i, but numerous errors appeared, physical and logical disks were missing...

Everything was fine after reboot, but this morning... MISTAKE ON MY DISPLAY:

"The controller you have connected to cannot communicate between its management controller and main storage controller"

photo_2021-06-26_18-27-42.jpg

Both controllers (A and B) do not answer...

In SMU this message:

photo_2021-06-25_12-39-24.jpg

But when I remove the controller A (or B) from MSA, remaining controller B (or A) works fine...

photo_2021-06-26_17-42-39.jpg

But both (A+B) controllers don't work togather...

Which setting will help me?

Please! 

It's important for me...

Catherine.

1 REPLY 1
Parvez_AL
Community Manager

Re: MSA 2012i Controllers Failing

This is a Duplicate post. Please refer to the below topic instead:

https://community.hpe.com/t5/MSA-Storage/MSA-2012i-Controllers-Failing/m-p/7140678

 


Thanks,
Parvez_AL
I work for HPE
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
CM_Cert_Logo_Color.png