HPE EVA Storage

MSA 2324fc firmware update

 
David Raymond_1
Occasional Advisor

MSA 2324fc firmware update

Hi I'm trying to update the firmware in the SMU. All documentation states:

In the Configuration View panel, right-click the system and select Tools > Update Firmware. The
tables titled Current Versions of Controller Module A and Current Versions of Controller Module B show the currently installed versions.

However Tools > Update Firmware doesn't exist. All I see is:

License Management
Reset Host Port
Rescan Disk Channel
Clear Disk Metadata

Any help?
6 REPLIES 6
marsh_1
Honored Contributor

Re: MSA 2324fc firmware update

hi,

another way to get there,have a look at the section starting on pg 107 in this guide :-

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01756042/c01756042.pdf



David Raymond_1
Occasional Advisor

Re: MSA 2324fc firmware update

I actually tried that after I posted (with minimal luck). Flash file not found?

ftp> mput m*bin flash
mput mercurysw-M110R21-01.bin? y
200 Port set okay
150 Opening BINARY mode data connection
226-Start progress messages
ftpDataStreamReceive passed, directive=STOR file:/mercurysw-M110R21-01.bin, leng
th=10791736
ftpdProcessStor: RAM file written
226 Transfer complete
ftp: 10791736 bytes sent in 4.34Seconds 2484.29Kbytes/sec.
flash:File not found
ftp>
David Raymond_1
Occasional Advisor

Re: MSA 2324fc firmware update

OMG! nevermind. You MUST use the "put" command instead of "mput" for FTP transfer.

thanks for your help.

Dave
Johnny von Heimerall
Frequent Advisor

Re: MSA 2324fc firmware update

Hi David,

After updating MSA FW you should have the option of future FW upgrades via SMU.

Johnny
Wickedsunny
Valued Contributor

Re: MSA 2324fc firmware update

Have attached the procedure for future documentation.

HTH

Regards,
Sunny
Wickedsunny
Valued Contributor

Re: MSA 2324fc firmware update

Have attached the procedure for future documentation.

HTH

Regards,
Sunny