HPE EVA Storage

MSA P2000 G3 and DSM on windows 2008

 
Francois Fournier
New Member

MSA P2000 G3 and DSM on windows 2008

So people don’t have to search the way i did here is the installation instruction for the HP DSM on windows 2008 R2

Download the HP DSM (4.01.01 as of this writing)
Install your server
Install the MPIO feature on Windows 2008 R2
Install the HP DSM package
Present the disk to the Server
run the command prompt (In “Administrator mode” or disable the UAC and reboot)
run the “mpclaim –e” (This will give you the tag for the HP device)
run the mpclaim –r –I –d “TAG ” (where tag is the one in the previous command
The server will reboot
Once the server reboot the HP DSM will show the disks presented to the server.
Life's a bitch aint'it