HPE Community
HPE EVA Storage
1752777 Members
6378 Online
108789 Solutions
New Discussion юеВ

Re: MSA1000 FW update

 
Marinel Rivas
Occasional Contributor

тАО05-10-2011 08:47 AM

тАО05-10-2011 08:47 AM

MSA1000 FW update

Good day.

Please can tell me the procedure to update a MSA1000 FW, and which would impact thereof on the database involved ..

Awaiting your response
0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО05-10-2011 09:12 AM

тАО05-10-2011 09:12 AM

Re: MSA1000 FW update

This depends if you have active/passive and want to stay at a/p or if you have a/p and want to go to a/a.

a/p version is 5.40
a/a version is 7.20

What version is running?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Marinel Rivas
Occasional Contributor

тАО05-10-2011 09:38 AM

тАО05-10-2011 09:38 AM

Re: MSA1000 FW update

The version currently used is 2.38
0 Kudos
Reply
PVD
Advisor

тАО05-11-2011 06:43 AM

тАО05-11-2011 06:43 AM

Re: MSA1000 FW update

Thats an old A/P firmware.

Take a look at the release notes for A/P5.4 and 7.2(AA) for the install procedures (Serial and using flash utility)

ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1145532910/v67369/592436-002_MSA10001500RelNotes.htm

IMPORTANT: Downgrading firmware from v7.xx/5.xx to v4.xx or earlier is not supported. Back-flashing firmware will result in a loss of configuration settings.

Ensure you have a valid backup of data prior to upgrade.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.