MSA1000 FW update

 
Marinel Rivas
Occasional Contributor

MSA1000 FW update

Good day.

Please can tell me the procedure to update a MSA1000 FW, and which would impact thereof on the database involved ..

Awaiting your response
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: MSA1000 FW update

This depends if you have active/passive and want to stay at a/p or if you have a/p and want to go to a/a.

a/p version is 5.40
a/a version is 7.20

What version is running?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Marinel Rivas
Occasional Contributor

Re: MSA1000 FW update

The version currently used is 2.38
PVD
Advisor

Re: MSA1000 FW update

Thats an old A/P firmware.

Take a look at the release notes for A/P5.4 and 7.2(AA) for the install procedures (Serial and using flash utility)

ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1145532910/v67369/592436-002_MSA10001500RelNotes.htm

IMPORTANT: Downgrading firmware from v7.xx/5.xx to v4.xx or earlier is not supported. Back-flashing firmware will result in a loss of configuration settings.

Ensure you have a valid backup of data prior to upgrade.