MSA1500cs

[KaneK]

I have an MSA1500cs that has a volume stuck in the rebuilding state. It appears to finish the rebuild then start again. I have only been able to find links to rebuild failures and volumes waiting to rebuild. Any advice? I won't be able to post the MSA report but I can look from suggestions.

[KaneK]

I should note that I do not have any failed drives indicated.

[JaYKaY_1]

Check if there any FW upgrade is required.

[KaneK]

Any considerations about flashing during a rebuild?

[JaYKaY_1]

are you using iscsi

[KaneK]

Fibre Channel