MSA1500cs

 
KaneK
Occasional Advisor

MSA1500cs

I have an MSA1500cs that has a volume stuck in the rebuilding state. It appears to finish the rebuild then start again. I have only been able to find links to rebuild failures and volumes waiting to rebuild. Any advice? I won't be able to post the MSA report but I can look from suggestions.
5 REPLIES 5
KaneK
Occasional Advisor

Re: MSA1500cs

I should note that I do not have any failed drives indicated.
JaYKaY_1
Advisor

Re: MSA1500cs

Check if there any FW upgrade is required.
KaneK
Occasional Advisor

Re: MSA1500cs

Any considerations about flashing during a rebuild?
JaYKaY_1
Advisor

Re: MSA1500cs

are you using iscsi
KaneK
Occasional Advisor

Re: MSA1500cs

Fibre Channel