MSA2000 CLI

[DdeBlance_2]

I have two MSA2000's and connecting throught the CLI port vis hyperterm. The first MSA2000 has no issues and I have type commands at the prompt. The second MSA2000 I can connect, but at the prompt it will not show what I am typing. But it does run the command when I hit enter. Any ideas???

Thanks
-D

[Steven Schweda · Accepted solution]

Not really a Tru64 question, is it? I'd
expect better answers sooner in some appropriate forum.

> [...] it will not show what I am typing.
> [...]

Same cable or different?

Does its serial port interface have a
"noecho" setting?

[DdeBlance_2]

Steve,

Sorry about being in the wrong forum... I didn't realize I had posted in the Tru64 forum.

Correct, when I type there is nothing showing on the command prompt. But when I hit return it runs the command I just typed.

It is the same cable just moving from one MSA to the other.

I'll look into the "noecho" setting.

Thanks again,
-D

[DdeBlance_2]

Steve,

Thanks for your help. I advised the tech working on the MSA's to look into an echo setting and sure enough.
>echo on
Simple as that....