HPE EVA Storage

MSA2000 vmware ESXi 4 : "no ports found"

 
ClaudioD'Anduono
Occasional Advisor

MSA2000 vmware ESXi 4 : "no ports found"

Hi there,
I've an issue with a DL495 connected to an MSA2000fc via a cisco 9124 fc-switch.

I tried to map a lun to an ESXi 4 host but result is that in Controller/Port column in Manage Host List I see "no ports found".

All FW are up to date, there is no zoning issue; I tried to extract blade from enclosure but problem still exists.

Do you know what can I do ?
3 REPLIES 3
Brian M Welch
Frequent Advisor

Re: MSA2000 vmware ESXi 4 : "no ports found"

Not familiar with the Cisco switches, but on HP, there's a web interface you can log into to check port status and see the WWN's of the hosts. If you aren't seeing the hosts, something is wrong with the HBA driver, cable, or zoning. Logging into the switch can help you determine where to begin.
Patrick Terlisten
Honored Contributor

Re: MSA2000 vmware ESXi 4 : "no ports found"

Hello,

what type of FC-HBA mezzanine card and interconnect module do you use in the blade chassis?

do you have FC-HBA mezzanine card installed? If yes, check if you plug it into the right slot so that it is matching the right interconnect module of the c-Class chassis.

Best regards,
Patrick
Best regards,
Patrick
creisor
New Member

Re: MSA2000 vmware ESXi 4 : "no ports found"

Was a solution to this issue ever determined?