MSA2012fc help

[Juan van der Merwe]

I have a msa2012fc.
Port 0 is directly connected to a server and the server can see the luns and v-drives.
Port 1 is connected to a Storageworks 8/24 San Switch (I have configured the ports as per the EZSwitchSetup application).
The servers (fc1142sr 4gb pci-e hba)that are connected to the san switch can see the luns but not the v-drives.

Have I missed seomthing or can someone please tell me what I am doing wrong?
Thanks in advance for the help.

[Danel_1]

Hi ,

I think that you must make a choice between direct connect or fabric connect .

You can confirm this in the installation guide .

best regards
Didier DANEL

[Juan van der Merwe]

Ok so must I remove the server directly connected to the msa2012fc and just use the switch? Is there a seeting somewhere that I need to change to use the fabric connect?

[Danel_1]

Yes , you can use the cli command line to set this parameters .

here is an example :

6.2.1. Paramétrage system

Create system name msa2_3cl804c037 contact â HPâ location â maquetteâ
Create network-parameters ip 128.131.239.121 netmask 255.255.224.0 gateway 128.131.32.1 controller A
Create network-parameters ip 128.131.239.122 netmask 255.255.224.0 gateway 128.131.32.1 controller B
create controller-date mar 19 15:06:00 2008 +1
create host-parameters channel all fibre-connection-mode point-to-point controller both speed 4G


Didier