HPE EVA Storage

MSA2312i G2 - Two Array Enclosures

 
Jimbobb
New Member

MSA2312i G2 - Two Array Enclosures

Hi

We currently have an MSA2312i G2 Dual Controller Array enclosure with two additional 12 Drive enclosures connected to it which is currently configured with multiple vdisks and volumes which are being used in a VMware environment.

We have recently acquired an additional MSA2312i G2 Dual Controller Array enclosure with a further 12 drive enclosure attached to it. Neither of these enclosures are configured with any volumes.

Is there a way to connect both the Array enclosures together in order to utilise both dual controllers to provide 4 controllers in total or would the best method be to keep both SANs separate?

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: MSA2312i G2 - Two Array Enclosures

I'm sure you cannot make 1 array from this 2 arrays...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Johan Guldmyr
Honored Contributor

Re: MSA2312i G2 - Two Array Enclosures

With G3 I believe HP introduced replication (scary).
But no, I don't think what you want to do is possible Jim.