HPE EVA Storage

MSA30, 6402 Raid controller, EMS, and msamon

 
jaredh
Occasional Visitor

MSA30, 6402 Raid controller, EMS, and msamon

I am trying to get the EMS monitor msamon to operate and recognize an MSA30 on an 6402 controller with no success.

EMS responds that there are no valid resources in its default configuration for msamon.

OS level is 11.23...and upgrading is not an option.

Does this monitor not function in this configuration?
1 REPLY 1
Torsten.
Acclaimed Contributor

Re: MSA30, 6402 Raid controller, EMS, and msamon

AFAIR this monitor is used for MSA1000 (MSA1500) only. If a MSA30 is connected to the MSA1000, it will be monitored too.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!