cancel
Showing results for 
Search instead for 
Did you mean: 

MSL5026 problem

 
SOLVED
Go to solution
Advisor

MSL5026 problem

Hi, I have a problem with a driver of a MSL5026. This the message i see: did not match serial number xxxxxxxx provided by Compaq StorageWorks DLT/SDLT Minium (Changer0) among the list of drivers.
Someone knows gives some information to me?

Thanks
18 REPLIES 18
Acclaimed Contributor
Solution

Re: MSL5026 problem

Where did you get this message?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Advisor

Re: MSL5026 problem

On the eventviewer from the server, which the storage is connected
Acclaimed Contributor

Re: MSL5026 problem

Who complains? The backup application?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Advisor

Re: MSL5026 problem

i wonna use NTBACKUP on W2003 server.
if ai connet in SCSI the LTO to the server, it see two DLT and a Changer. but if i connet it in Fiber Channel, the server mount 1 DLT and a Changer, and in the event viewer i see that error
Acclaimed Contributor

Re: MSL5026 problem

The information flows bit by bit into this thread ...


You should check the NSR discovery and mapping page now.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Valued Contributor

Re: MSL5026 problem

The barcode reader has a problem
Acclaimed Contributor

Re: MSL5026 problem

The barcode reader will make a drive invisible? Why?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Advisor

Re: MSL5026 problem

if The barcode reader has a problem, why it works fine in SCSI e not in FC ?
Acclaimed Contributor

Re: MSL5026 problem

Did you check the NSR already? Any results?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!