HPE EVA Storage

Missing Zone Configuration on Web Tools

 
SOLVED
Go to solution
Rajs
Frequent Advisor

Missing Zone Configuration on Web Tools

Hi,

We have encountered issue with a HP Brocade 4/24 SAN Switch in a C-7000 Blade enclosure. Intermittantly when we try to access the zone configration from the web tools, zone config tab does not show any infomation of the existing zones. Once switch is restarted problem is fixed. Has anyone encountered this issue before? Any suggestion for a permenant solution? This switch is running fabric os versin 6.0.1a.
4 REPLIES 4
PP BIJU KRISHNAN
Trusted Contributor
Solution

Re: Missing Zone Configuration on Web Tools

Could be due to memory leak problem.

The web tools in some versions takes time to respond and reflect the correct status due memory hogging on the switch.

When this happens
Login as root
run the vmstat command and paste it here.


Consider upgrading the firmware to newer release.

Rajs
Frequent Advisor

Re: Missing Zone Configuration on Web Tools

Thanks for your reply. I'll collect vmstat output when issue apprears again.
PP BIJU KRISHNAN
Trusted Contributor

Re: Missing Zone Configuration on Web Tools

Login as root and run

$vmstat 5 5

Rajs
Frequent Advisor

Re: Missing Zone Configuration on Web Tools

After firmware upgrade this switch start restarting every few minutes. (in 2, 3 minutes) So we have replaced the SAN switch.