Multiple active zonesets (Cisco MDS)

[Timo Steylen]

hello,
i have a question about Cisco SAN Switches. This concerning switch has in each VSAN an active zoneset. I will change one of the zonesets, and active that zoneset. But the other zonesets in each VSAN must be remain activated.
Is this possible with the following command?
<< zoneset activate name "name" vsan # >>
Or will this make the particulary zoneset activated and the other zonesets de-activated?

thanks!

[Prakash Singh_1]

HI,

At any point of time only one Zoneset can be activated in one VSAN.

The command << zoneset activate name "name" vsan # >> will activate the zoneset in that particular VSAN and the other active zonesets in different VSAN's will remain active.

Hope this answers ur querry....


Regards,

Prakash

[Timo Steylen]

Thanks!

it works fine!

Regards,
Timo

[Prakash Singh_1 · Accepted solution]

You r welcome....Lemme knw if anything needed further....Or else u can assign pts....