HPE EVA Storage

NPIV configuration on HP StorageWorks 8/20q SAN Switch

 
Santhosh Ramesh
Advisor

NPIV configuration on HP StorageWorks 8/20q SAN Switch

How do I enable NPIV on the HP StorageWorks 8/20q SAN switch? I have the latest firmware installed (8.00.2.02).

Thanks,
-Santhosh
2 REPLIES 2
Sameer_Nirmal
Honored Contributor

Re: NPIV configuration on HP StorageWorks 8/20q SAN Switch

You can enable NPIV on a port by port basis by changing the port mode to TR.

(admin-config) #> set config port

Refer the switch command line interface guide as well.

http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=3662821&targetPage=http%3A%2F%2Fbizsupport2.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc01376638%2Fc01376638.pdf
Sivakumar MJ._1
Respected Contributor

Re: NPIV configuration on HP StorageWorks 8/20q SAN Switch