Newbie question

 
ossupport55
Frequent Advisor

Newbie question

Dear all,

 

I'm trying to figure out how I can collect a complete dump from the EVA6K and EVA4K arrays to be forwarded for support renewals. Ideally all info including serial numbers, number of enclosures, disks and serial numbers, etc.

 

TA

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Newbie question

It should be easy to count the number of enclosures, but the serial# of the array is not stored on the array itself.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
giladzzz
Honored Contributor

Re: Newbie question

Hi

you can collect EVA information using SSSU script

it collects everything you need about the EVA except system serial number 

that is not stored on the EVA except for EVA4400 EVA6300 and EVA6500

read the instructions in the file attached to create the file

Zohar