No storage system

 
SOLVED
Go to solution
imsi
Advisor

No storage system

Maybe i got help here

 

I got 2 hp hsv 200 and 1 disk enclosure

When i start disk enclosure then controllers

Enter WWN 

On both controllers <No storage system>

Connection right all green light behind cotrollers

 

any advice?

20 REPLIES 20
Torsten.
Acclaimed Contributor

Re: No storage system

Did this work before or is it a new setup?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
imsi
Advisor

Re: No storage system

it's was configured but never works

5 years nobody can configure it right

Torsten.
Acclaimed Contributor

Re: No storage system

Start from scratch?

Input the WWN and checksum from the front panel, then initialze the array from CV.

How many disks are installed?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
imsi
Advisor

Re: No storage system

Where I can find initialize menu?
14 disks installed
Torsten.
Acclaimed Contributor

Re: No storage system

Can you see and access the eva from CV? If yes, uninitialze and initialize again. If this is not possible, uninitialize from OCP and check again from CV.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
imsi
Advisor

Re: No storage system

uninitialize from OCP and check again from CV. Still got No storage system

In manual i see initilization menu on OCP but in my case it never show up

Sheldon Smith
HPE Pro

Re: No storage system

First thing would be to check your fiber channel switch zones between the HSV200 and the Windows host running Command View EVA.


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

imsi
Advisor

Re: No storage system

I check zones through com port and terminal access

By the way i see both controllers in HBAnyware

 

Rediscovery controllers, operation succeeded but no storage again

Torsten.
Acclaimed Contributor

Re: No storage system

OK, no zoning at all.

What CV version is installed?

Is the EVA visible in CV now?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!