HPE EVA Storage

P2000G3, iSCSI vSphere, Round Robin recommended/supported?

 
James Heintz
New Member

P2000G3, iSCSI vSphere, Round Robin recommended/supported?

Setting up a P2000G3, iSCSI on vSphere 4.1.

Dual controller, Port 0 of each controller connected to switch 1 on subnet 1, Port 2 of each controller connected to switch 2 subnet 2. ESX servers, two iSCSI VMkernal ports, one on each subnet.

VMWare HCL says MRU as a Path Policy.

VMware HCL also says..

"The path policy of VMW_PSP_RR may also be supported but not be necessarily listed in the 'Mode' and 'Path Policy' columns of the 'Model/Release Details' page. Storage partner may recommend VMW_PSP_RR for path failover policy for certain storage array models. If desired, contact the storage array manufacturer for recommendation and instruction to set VMW_PSP_RR appropriately."

So, is this an appropriate forum to get a recommendation for using round robin?

Thanks, Jim