HPE EVA Storage

P6300 Total capacity is more than physical capacity and no update after changed a failed disk

 
SOLVED
Go to solution
Liu Yinli_1
Occasional Contributor

P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hi All,

 

Yesterday I changed a failed disk.

 

I have two questions.

 

1. There are 600GB disk x 12 in the disk group. The actual capacity should be 558GB x 12=6696GB. But in CV the total capacity of the disk group is 9563GB.

 

2. The Single protaction level is not available. But before the disk failed it is available. I think it will be available after I change a new disk. It seems that it does not add the new disk's capacity into the available capacity.

 

There is only one disk group. There are three vraid6 vdisks. The total capacity of these vdisks is 3300GB.

 

Thanks.

11 REPLIES 11
Torsten.
Acclaimed Contributor

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Make sure all disks are grouped.
How about the disk group view?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Liu Yinli_1
Occasional Contributor

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hi Torsten,

 

Thank you.

 

All disks are grouped.

 

The attachment is the disk group  view.

 

Torsten.
Acclaimed Contributor
Solution

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Ok, now I see.

The tital is even gretare than 12*600.

I would try first to boot the controllers one by one and see if this helps.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
AndrewZhalnin
Occasional Advisor

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hi, Torsten!

Could you help me with this similar issue

Thanks a lot!

 

Torsten.
Acclaimed Contributor

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Did the restart help?

The link is bad and should be

http://h30499.www3.hp.com/t5/Storage-Area-Networks-SAN/Migrate-issue/td-p/6101315#.UcwtjW3gUaM

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
AndrewZhalnin
Occasional Advisor

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Thanks for reply!

I didn't restart. Should I restart both controllers at the same time or one by one?

Torsten.
Acclaimed Contributor

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

First I would try one by one, so you can do this online.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
AndrewZhalnin
Occasional Advisor

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hi!

I restarted controllers, but... the result is the same, unfortunately...

May be I was wrong with my calculations. Tell me please what is the formula for actually allocated space? I have vraid6 and vraid5 vdisks.

susanta_dutta
Trusted Contributor

Re: P6300 Total capacity is more than physical capacity and no update after changed a failed disk

Hello Liu,

 

Can you please share the SSSU commands output. Refer the attached temaplate.

 

Regards

Susanta