HPE EVA Storage
1748000 Members
4446 Online
108756 Solutions
New Discussion юеВ

Re: Present Multiple disks in command view 10

 
Mel Nugent
Regular Advisor

Present Multiple disks in command view 10

Im adding a couple of new blades for our VMware clusters and have a lot of vdisks to present from our EVA8000. I want to know is it possible in command view 10 to go into the hosts section and then select a host and then select multiple vdisks and present them.

 

Fuction appears to be there but when I select a host and click present I don't get a list of vdisks.

 

Thanks

Mel

current presentations

 

 

when I click present I get an empty list

 

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Present Multiple disks in command view 10

Consider sssu scripting.

Example:

ADD LUN <LUN#> VDISK=<vdisk-name> HOST=<host-alias>

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Mel Nugent
Regular Advisor

Re: Present Multiple disks in command view 10

Thanks Torsten,

 

I'd though so but just looks like the functionality is there in CV but not working. maybe not avilablefor the EVA8000 only the later models.

 

I'll try SSSU and see how it goes.

 

Mel