Presenting Vdisk to a host

[Uwe Zessin]

It is _very_important_ for the stability of the EVA-4400 that you set up zones on the Fibre Channel switch. Put one EVA-port and one blade/server port in a zone. Create additional zones for the other EVA/server port(s).

The virtual disk is "presented" via the [presentation] tab to a host object in the \Hosts folder hierarchy. If you have not done so already - move to that folder and click [Add host].
Check twice that you have selected the correct WWNs (you can see them in the blade system's OA) and chosen the correct operating system type.