Problem with HP fc 16B

[Venkat Nagesh]

Hi,

I have a brocade switch with fw version 3.2.0a.
It gives the below panic error and keeps rebooting. Can anyone help on this.
-------------------------------------
Running Turbo RAM Test ........ passed.

Running CAM Test ..............Apr 10 09:40:33

Panic: INCONSISTENT - pt0: cmi err, 0x42, 0x80000000

reset sema 0x102dfc00 for tReceive

0x10328320 (tSwitch): Apr 10 09:40:34

CRITICAL DIAG-CAMINIT, 1, CAM Test, pass 1,

Pt0 (Bm0.0) Failed to Init: port not active,

Err# 223B

FAILED.

----------------------------------------------

[Preuce Kumar Nellikkal]

DIAG-CAMINIT
============

Probable Cause
-------------

The specified port failed to initialize due to one of the following reasons:

â ¢ The switch is not disabled.
â ¢ The diagnostic queue is absent.
â ¢ The memory allocation (MALLOC) failed.
â ¢ A chip is not present.
â ¢ The port is not in loopback mode.
â ¢ The port is not active.

Recommended Action
------------------

Retry, then reboot if necessary. If the problem recurs, replace the mainboard assembly.

Severity
---------
Critical
=======================================

Preuce Kumar