Problems with Command View and MPIO

[Roell]

Hi all,

i installed Command View for EVA and MPIO
on a DL380 G4. (Windows Server 2003 SE)

After installing MPIO, Command View can´t see the EVA. (3000)

Does Commad View need all Paths to the EVA ?

Thanks in advance !

[Uwe Zessin]

CV-EVA can work with a single path if it goes to the master controller, but MPIO should not filter the LUN 0 anyway.

[Steven Clementi]

Roell:

Do you have the latest versions installed?

I believe CV-EVA is up to 4.0.1 (assuming you have 4.x).

Also, which version of MPIO did you install?

Steven

[Johannes Roell_1]

Hi,

its CV-Version 3.3 and MPIO Version 1.0

I tried it with version 4.0 of CV, but it
was the same..

[Fredrik Uddin-Backman2]

Do you have EVA PLatform kit installed? You must use FC HBA driver from the kit and not the newer one from Proliant Support pack i think.

[Roell]

Thanks to all for your help !

I forgot to install HP SMIS BEVOR install
Command View.

If I install SMIS first, then Command View
and then MPIO, it works !