HPE Community
HPE EVA Storage
1753269 Members
5206 Online
108792 Solutions
New Discussion юеВ

Re: Q logic port setting

 
Dileep..
Trusted Contributor

тАО08-25-2009 08:03 AM

тАО08-25-2009 08:03 AM

Q logic port setting

Hello All,
I have qlogic card QMH2462 connected to Brocade san switch. San switch port is **not** locked as L port however its showing as "L port" in switchshow

While i checked the portinfo in windows, type is showing as " PortType: NL_Port" . Can some one tell me how can i change to N_port ?

NodeWWN: 50:01:43:80:03:bd:bf:e1
PortWWN: 50:01:43:80:03:bd:bf:e0
PortFcId: x0108ef
PortSymbolicName:
PortType: NL_Port
PortState: online
PortSupportedClassofService: Class_4
PortSpeed: 4gbs
0 Kudos
3 REPLIES 3
Ivan Ferreira
Honored Contributor

тАО08-25-2009 08:19 AM

тАО08-25-2009 08:19 AM

Re: Q logic port setting

Install the QLogic SAN Surfer utility and you will be able to change the port settings.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
Uwe Zessin
Honored Contributor

тАО08-25-2009 09:18 AM

тАО08-25-2009 09:18 AM

Re: Q logic port setting

Or press ALT-Q during POST and change the topology to point-to-point.
.
0 Kudos
Dileep..
Trusted Contributor

тАО08-27-2009 10:08 AM

тАО08-27-2009 10:08 AM

Re: Q logic port setting

Thanks for the qucik reply
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.