RSM Mirror Job Error

[AGardner]

Hi guys,

I have a scheduled job in Replication Solutions Manager 5.1 that fractures a mirror and mounts the fractured copy to another server for backup.

Since upgrading to version 5.1, this job no longer runs correctly. The job fails when attempting to sychronise the mirror with the following error message:

ERROR: Operation failed with exception: Resync failed: ERROR:unable to resync because mirror is presented or already resumed nnnnnnnn-nnnn-nnnn-nnnn-nnnnnnnnnnnn

ERROR: Task ResyncMirrorclones failed

The fracture is not presented to any host and it is not resyncing.

The agent software on the servers has been upgraded and command view and the controller firmware have also been upgraded.

The job is from the templates built in to the system. I have attached the job for reference.

Any suggestions? I'm stuck on this one.

Regards,

Andrew Gardner
Steria Ltd.

[Sivaramakrishna_1]

Hi,

Even we are facing the same.. Do you have solution found for this..

In our case we are trying to upgrade RSM to 5.2 and see the result.

Thanks,
Siva

[Sivaramakrishna_1]

Hi,

The same issue was closed after installing CV 9.3 and Installed RSM 5.2

Siva