HPE EVA Storage

RSM Mirror Job Error

 
AGardner
Occasional Advisor

RSM Mirror Job Error

Hi guys,

I have a scheduled job in Replication Solutions Manager 5.1 that fractures a mirror and mounts the fractured copy to another server for backup.

Since upgrading to version 5.1, this job no longer runs correctly. The job fails when attempting to sychronise the mirror with the following error message:

ERROR: Operation failed with exception: Resync failed: ERROR:unable to resync because mirror is presented or already resumed nnnnnnnn-nnnn-nnnn-nnnn-nnnnnnnnnnnn

ERROR: Task ResyncMirrorclones failed

The fracture is not presented to any host and it is not resyncing.

The agent software on the servers has been upgraded and command view and the controller firmware have also been upgraded.

The job is from the templates built in to the system. I have attached the job for reference.

Any suggestions? I'm stuck on this one.

Regards,

Andrew Gardner
Steria Ltd.
2 REPLIES 2
Sivaramakrishna_1
Honored Contributor

Re: RSM Mirror Job Error

Hi,

Even we are facing the same.. Do you have solution found for this..

In our case we are trying to upgrade RSM to 5.2 and see the result.

Thanks,
Siva
Sivaramakrishna_1
Honored Contributor

Re: RSM Mirror Job Error

Hi,

The same issue was closed after installing CV 9.3 and Installed RSM 5.2

Siva