HPE EVA Storage

Right use not connected host ports on EVA controllers.

 
SOLVED
Go to solution
gdi63
Occasional Contributor

Right use not connected host ports on EVA controllers.

We have EVA 6350, 2 controllers.

4 FC host ports are available on each controller.

We have connected only 2 ports of each controller according to the manual.

               Switch1                    Switch2

                    |                X             |

              Controller1               Controller2

 

It seems that everything works fine.

But the operational state of the controllers is dispayed as degraded.

 

Is it posible to configure the Command View to avoid displaying those warning?

 

1 REPLY 1
Torsten.
Acclaimed Contributor
Solution

Re: Right use not connected host ports on EVA controllers.

No.
Consider to use loopback connectors for the open ports.

 

 

However, you don't have the availability you could have ...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!