HPE EVA Storage

SAN connectivity betwwen HP blade and brocade san switch 300 embedded to assign eva storag

 
SimIT
Regular Advisor

SAN connectivity betwwen HP blade and brocade san switch 300 embedded to assign eva storag

unable to have connection betweenbrocade san switch and HBA from blade enclosure.
no LED flash on HBA port.

3 REPLIES 3
Jameo
Advisor

Re: SAN connectivity betwwen HP blade and brocade san switch 300 embedded to assign eva storag

do the HBA's loged into virtual connect FC module or san switch which is installed on blade slot 3 and 4?

SimIT
Regular Advisor

Re: SAN connectivity betwwen HP blade and brocade san switch 300 embedded to assign eva storag

There is a direct FC cable connection from HBA to SAN switch.

No light on HBA

no light on san switch port

Pramod_M
Occasional Advisor

Re: SAN connectivity betwwen HP blade and brocade san switch 300 embedded to assign eva storag

Hi,

 

Have you got the solution?

As per the subject of this post, it is mentioned a connectivity between one Blade Server and SAN Switch. Is it using a Blade interconnect module SAN Switch or using a Virtual Connect FC module? Also is OS is up and running? Is the SAN switch port is enabled? Is the FC cable is fault free?

 

Regards,

 

Pramod