HPE Community
HPE EVA Storage
1753914 Members
8906 Online
108810 Solutions
New Discussion

Re: SANLoader :How we can configure sanloader software to work with ssh session rather then telnet.

 
Jitendra Singh Lodhi
Occasional Advisor

‎08-26-2009 08:43 PM - last edited on ‎05-04-2015 08:09 PM by

‎08-26-2009 08:43 PM - last edited on ‎05-04-2015 08:09 PM by

SANLoader :How we can configure sanloader software to work with ssh session rather then telnet.

Hi,

For switchconfiguration backup we are using tool SANLoader.where we have to telnet the switches by proving IP and then we can take configbackup.

But in our environment telnet is not enabled only ssh session is enabled.

Please help me out if somebody knows how to configure or enable it through ssh.

 

 

p.S. This thread has been moved from General to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎08-26-2009 08:53 PM

‎08-26-2009 08:53 PM

Re: SANLoader :How we can configure sanloader software to work with ssh session rather then telnet.

Please open the help, get the contact email and suggest the developer to implement this.

;-)

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.