HPE EVA Storage

Secure Path Manager and PSP 7.20 Agents - Broke?

 
SOLVED
Go to solution
Derek_31
Valued Contributor

Secure Path Manager and PSP 7.20 Agents - Broke?

When I install Secure Path Manager 4.0c SP1 on a server with the PSP 7.20 agents, I do NOT get a link on the home page to launch the SPM.

Is SPM 4.0c SP1 not compatible with PSP 7.20 homepage?
8 REPLIES 8
Iain Balmer_1
New Member

Re: Secure Path Manager and PSP 7.20 Agents - Broke?

Yep, I've found this out as well. Tried it with another server running Secure Path Manager, and lo and behold its gone.

Anyone know of a way to get it back ?

Andrea_B
Occasional Advisor

Re: Secure Path Manager and PSP 7.20 Agents - Broke?

I have the same problem.
Someone have find a solution?

José Andrés
Frequent Advisor

Re: Secure Path Manager and PSP 7.20 Agents - Broke?

I have the same proble, I've installed the Support pack 7.30 and the problem continues.

Someone could I help me?

Thanks
Rob_222
Occasional Contributor

Re: Secure Path Manager and PSP 7.20 Agents - Broke?

Same problem here, is it possible to roll back to PSP 7.10 to try and fix the link ?
It's more like an insecure path manager now
Andrea_B
Occasional Advisor

Re: Secure Path Manager and PSP 7.20 Agents - Broke?

I have upgraded some system at one customer
to 7.20 for now; For me No problem if the link is broken, if you use spmgr at a command DOS and type "spmgr display" you can see the lun of the storage see by secure path.
I hope that future release of secure path resolve this situation.

Bye-bye all

Marco Hogeveen_1
Trusted Contributor
Solution

Re: Secure Path Manager and PSP 7.20 Agents - Broke?

HP released a customer advsory yesterday about this issue.
Please have a look at it on http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_OS050420_CW01

So you should wait for SP 4.0cSP2.

Marco
Mark_575
Frequent Advisor

Re: Secure Path Manager and PSP 7.20 Agents - Broke?

I have installed SP2 for Secure Path 4.0c for workgroups and I still don't see the link in the device home page... with PSP 7.20

Should I upgrade to PSP 7.30?

How do you tell what version you have once it's installed?

I believe the old URL was
https://127.0.0.1:2381/appntucpqsecurepath/files/spm.html

But this does not work any more.

Can someone confirm this please.

Thanks


Patrick Terlisten
Honored Contributor

Re: Secure Path Manager and PSP 7.20 Agents - Broke?

Hello,

is there any fix until today? I've got SHM 3.0 installed and Secure Path Manager (SP2) doesn't work any more.

Best regards,
Patrick
Best regards,
Patrick