Start Lun Failure

 
Moon_3
Advisor

Start Lun Failure

Hi,

Anyone seen error message "Start Lun Failed" on the FCA 2101 Bios while scanning after presenting EVA5000 Storage.
i have 2 FCA's , one configured for XP storage with Lun0 presented for OS which works without problems while the other Configured for EVA 5000 to present some other Luns . Both cards are zoned on differnt switches and isolated from both storages.

While scannig for the storage on the card's bios thats on Brocade Switch the EVA is detected but when you try to select the lun the error pops up."Start Lun failed"

Any fix or suggestions? FCA2101 is on FW RS3.91A1

appreciate your help!

thanks

1 REPLY 1
ErikSchorr_PF
New Member

Re: Start Lun Failure

@Moon_3  Did this ever get resolved?  If so, was it an adapter setting, SAN fabric issue, or did you replace the FCA?