HPE EVA Storage

StorageWorks P2000 G3

 
danieleb
New Member

StorageWorks P2000 G3

Hi all, i'm next to buy a P200G3 with 2 iscsi controller (8 x 1Gb iscsi), 2 DL380G7 and 2 procurve 2910 switch to set a HA infrastructure. Is possibile to match SAN iscsi ports togheter to enhance througthput? I mean, 1Gb between server and san to set up a DB storage could be poor imho.
Does anyone knows cache size of P2000 iscsi controllers?
TIA,
Daniele.
1 REPLY 1
Steven Clementi
Honored Contributor

Re: StorageWorks P2000 G3

I don't recall there being any options to bond iSCSI ports on the MSA in the web interface.

I could be wrong, I have not set up iSCSI on the ones I've installed. From what I remember, there were only network setting fields that were settable, but Idid not dig deep.

On the other hand, with 8 ports... you can do lots of load balancing and/or multipath.

As for poor performance... it depends on how utilized the databse server(s) are going to be.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)