HPE EVA Storage

The correct parse file could not be found

 
SOLVED
Go to solution
Mustafayev
Occasional Visitor

The correct parse file could not be found

Good day,

 

we are using EVA 4400 storage with HSV300 controller. In event log there are multiple log entries as bellow:

 

WARNING! The correct parse file could not be found. The default file is being used. This could result in an incorrect parsing of data of this event. Please locate the correct parse file for the current firmware version and upload it using the Send Parse File button on the Controller Event page. The correct parse file is: : *HSV300_*event_CR1CDF_10000000.txt It should be installed in the directory: /hp/cv/events/.

 

But i can not find specified directory, where it is located? Please help me resolve this problem.

4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: The correct parse file could not be found

Do you run firmware 10000000?

 

It is unsupported since end of 2011!

 

Consider to upgrade to 11200000 and use the same firmware file as parse file.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Mustafayev
Occasional Visitor

Re: The correct parse file could not be found

Thanks for reply Torsten.

 

Yes, firmware version is 10000000. But where i can find firmware file and upgrade guide? I searched it some time ago, but can not find.

Torsten.
Acclaimed Contributor

Re: The correct parse file could not be found

Follow the instructions:

 

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T4256-63159

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Mustafayev
Occasional Visitor

Re: The correct parse file could not be found

I followed giude and updated firmware. Thank you very much!