Trouble with EVA4400 disk firmware updating

[Pyr0Texn1c]

I've successfully upgraded eva4400 firmware to 11200000 and also updated management module's firmware to 0002.3000. Everything seems to be OK, even I can now manage the storage system with MM's Command view applet, I couldn't do it before. Status of whole system is shown Good. But when I try to update firmware of Disks by common option, or individual, after I've chosen file for upload on next step I get an error "The base port for HP P6000 Command View has changed. Browse to https://YourServerID:2374 to manage your storage systems." Any ideas?

[Torsten. · Accepted solution]

Did you use the new port?

Clear browsers cache or use another browser.

[Pyr0Texn1c]

Thanks, Torsten, you were right! I've tried another browser and it's worked. Almost. Now, when doing common code load, I get error "The bundled image directory path cannot be found", but individual disk code load works. Thanks again.