HPE EVA Storage

Updating an old version of a B-series switch

 
Brian Kegel
Occasional Contributor

Updating an old version of a B-series switch

I have an older B-series switch running V5.3.1.  Where can I find the older firmware so I can get this up to date?

 

Thanks.

3 REPLIES 3
Johan Guldmyr
Honored Contributor

Re: Updating an old version of a B-series switch

Hey, which model do you have?

It is likely that your switch cannot go to 6.x, you can find out if it's supported by looking in the release notes of the firmware.

 

5.3.2c and 6.0.1a and 6.1.2b can be found here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=3414314&prodNameId=3414317&swEnvOID=54&swLang=8&mode=2&taskId=135&swItem=co-86625-1

Sheldon Smith
HPE Pro

Re: Updating an old version of a B-series switch

Or go to SPOCK (http://www.hp.com/storage/spock) and check the B-Series FC Switch Connectivity stream document.

If your switch can go to 6.x, you can go to 6.0.x directly from 5.3.1.


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

Johan Guldmyr
Honored Contributor

Re: Updating an old version of a B-series switch

If you have a standalone 2G switch you'll have to look in an older version of a B-Series FC Switch Connectivity stream.