HPE EVA Storage
1748259 Members
3911 Online
108760 Solutions
New Discussion юеВ

Re: Upgrade Command View software

 
SOLVED
Go to solution
uspfoms
Regular Advisor

Upgrade Command View software

Planning to upgrade from CV 6.0 to CV 9.2
on EVA6000, can I use the CV 9.2 and RSM 5.1
Media kit or is this just a patch for CV 9.0 and RSM 5.0 ?
6 REPLIES 6
Marcus Schack
Trusted Contributor

Re: Upgrade Command View software

This is a multi-jump upgrade. You could just flatten the server and rebuild it with the new kit. Might be faster, but make sure that you have all of the licenses for the new version.
V├нctor Cesp├│n
Honored Contributor

Re: Upgrade Command View software

The EVA6000 needs to be on firmware 6.100 at least to use Command View 9.2.

If it's on an older version, you need to update it to 6.100 before updating Command View.
uspfoms
Regular Advisor

Re: Upgrade Command View software

Thanks, But what I really need to know
is CV 9.2 and RSM 5.1 only patches
for 9.0 and 5.0 or is that a complete install?
Torsten.
Acclaimed Contributor
Solution

Re: Upgrade Command View software

Not a patch, it is a complete new version.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
V├нctor Cesp├│n
Honored Contributor

Re: Upgrade Command View software

Command View 9.2 and RSM 5.1 are full installs. See a similar quiestion here:

http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1417061
uspfoms
Regular Advisor

Re: Upgrade Command View software

Thanks Torsten,That's what I needed.