Upgrading an EVA4400 to EVA6400

[ArielB]

Hello,
I am planning to upgrading an EVA4400 to an EVA6400.
The plan is to change only de Controllers.
The EVA4400 has 4 x M6412 ( PN: AG638A) and 1 x M6412-A (PN: AG638B) disk enclosures.

Please, I need to know how I must to cable these disks enclosure to the new EVA. is there any guide??

Thanks

P.S. This thread has been moved from Disk Array to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

[Uwe Zessin]

The cabeling is documented in the "HP StorageWorks 6400/8400 Enterprise Virtual Array installation guide" (576283-001)

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=12169&prodSeriesId=3900918

[ArielB]

Thank you for your answer, but I cannot find de guide "HP StorageWorks 6400/8400 Enterprise Virtual Array installation guide" (576283-001) in that URL.

Some informatión is in the guide ¨HP StorageWorks EVA6400/
8400 M6412A disk enclosure
installation instructions ¨
but is incomplete. I need more help because I have 5 disks enclosure.



Thanks again

[Uwe Zessin]

Wonderful :-(
I /love// HP's support infrastructure...

A .ZIPped copy is 4.5 MegaBytes and cannot be attached, sorry.

[ArielB]

Please, could you try to send by email to
joffre_benavides@hotmail.com

I will appreciate so much

[Uwe Zessin]

Please don't take any offense, but I don't want to expose my office or private e-mail address and I am losing *too much* time due to HP's inadequate support infrastructure so I will not make any efforts to set up a temporary mail account.

Maybe somebody else can help or ask HP to supply the document.

[ArielB]

ups, I am so sorry, you are right

Thanks for all