HPE EVA Storage

Urgent - Cannot connect to CLI through telnet/SSH

 
Zouaghi
Occasional Contributor

Urgent - Cannot connect to CLI through telnet/SSH

Hello,

I have changed the ip address from default ones (10.0.0.2/3) to a new ones (10.25.130.39/40), However the new IP addresses are not pinging. I read in the manual (User Guide) this may happen and the solution would be to run the command # restart mc both

I guess that I have to access through Serial CLI, the problem is that when I connect to serial cli (via mini usb), I fail to access. in the manual it said that I need gserial.inf to be installed on my Windows Laptop.

I didn't find this gserial anywhere.

Could someone help me on this?

5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: Urgent - Cannot connect to CLI through telnet/SSH

Is this about a P2000 G3 or MSA2000 array?

Please clarify.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
GregSottile
Occasional Contributor

Re: Urgent - Cannot connect to CLI through telnet/SSH

is a link to gserial.inf available through HP?

Torsten.
Acclaimed Contributor

Re: Urgent - Cannot connect to CLI through telnet/SSH

USB driver is here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=4118560&prodTypeId=12169&prodSeriesId=4118559&swLang=8&taskId=135&swEnvOID=1005

 

 

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=4118559&prodNameId=4118560&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-cfbbf2c4d12c4e058976ee80e3


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
GregSottile
Occasional Contributor

Re: Urgent - Cannot connect to CLI through telnet/SSH

Thanks for the links. I should have put this in my original post, do you know if there is a WIN7 version? I just looked and I did not see Win7 listed.
GregSottile
Occasional Contributor

Re: Urgent - Cannot connect to CLI through telnet/SSH

For the heck of it, I just downloaded the 2K8 x64 version and that appears to be working.  Thanks for the assist