Vdisk and data replication groups have failed

[mic4dw]

The storage device is an HPE EVA 6000 storage with 4 disk enclosure and 14x146 GB disk in each enclosure. The disk group is showing failed . What could be the problem?

"the following Vdisk and data replication groups have failed as a result of a hardware failure in this group."

[support_s]

System recommended content:

1. Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access EVA P6000 for Linux, April 2021 | Data replication Groups (DR Groups)

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[sbhat09]

Hello @mic4dw,

Can you please check for any disk, SAS port or enclosure failure?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

[mic4dw]

@sbhat09 

[rmv978]

Disk Group failure is caused due to multiple disk failure. raise a support ticket. do not replace any drives.