WWN read

 
Immo
New Member

WWN read

as I can select wwn a Qlogic the HBA
7 REPLIES 7
Niels Vejrup Pedersen
Respected Contributor

Re: WWN read


There a numerous ways.

1) Check the labels on the card
2) Check in the HBA Bios
3) Check in SanSurfer
4) Check the specific port on your fc switch

Regards
Immo
New Member

Re: WWN read

is it which as MAC address is indicated? where do I find in setup? WWN does not stand there.
Niels Vejrup Pedersen
Respected Contributor

Re: WWN read

Maybe i should have asked if it is a FC HBA or iSCSI HBA ?

Regards
Immo
New Member

Re: WWN read

a FC HBA
Niels Vejrup Pedersen
Respected Contributor

Re: WWN read

Usually there is a sticker on the card itself.

If you have it installed in the OS you can use Qlogic SanSurfer to view the card properties.
Immo
New Member

Re: WWN read

im install a SAN Boot a OS is not installt
Niels Vejrup Pedersen
Respected Contributor

Re: WWN read

Then enter the Qlogic HBA BIOS at boot.

Regards