HPE EVA Storage

apply license to CommandView

 
SOLVED
Go to solution
Carol Yu
Frequent Advisor

apply license to CommandView

Hi,

I have downloaded CommandView 1.07 and installed it. I was given a permanent license key from HP as a file cvkey.txt and was told to install with with "licUtil -I cvkey.txt HP_CommandView_SDM. But the system can't find licUtil.

What is the right way to apply license to CommandView?

Thanks a lot,
Carol
4 REPLIES 4
Uday_S_Ankolekar
Honored Contributor
Solution

Re: apply license to CommandView

licUtil file should be present in /opt/sanmgr/cssi/Licensing/sbin directory. Try running this by giving full path. Or you can also try this from commandview gui cmdviewVA opt/sanmgr/commandview/client/sbin directory.


-USA..
Good Luck..
Felipe Martinez
Frequent Advisor

Re: apply license to CommandView

Hello:

I´m on the correct directory but allways than i use the command licUtil install licva.txt HP_CommandView_SDM the output is the same like if i use just licUtil, wath is wron
tangliang0755
New Member

Re: apply license to CommandView

when you installed CommandView and you had not install software about CommandView,for example SSLIC etc.
tangliang0755
New Member

Re: apply license to CommandView

These include
CMDVIEWSDM,
HPOVSAMJR,
HPOVSAMHA,
HPOVSAMDA,
HPOVSAMHB,
HPOVSAMSG,
HPOVLIC,
SSLIC,
SMI-S_VA.