HPE EVA Storage

booting problem 4/8 SAN switch

 
michael oticha
Occasional Contributor

booting problem 4/8 SAN switch

Gurus ,

I have aproblem with 4/8 SAN switch which after I power on and connect to it through the serial connection , I get the attached errors that run nonstop . I will appreciate for any help on this.

Thanks

Michael
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: booting problem 4/8 SAN switch

If this is the only output you get (can you login?); there is probably nothing you can do - replace.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
michael oticha
Occasional Contributor

Re: booting problem 4/8 SAN switch

I cannot login at all . I am stuck on this point .
Johan Guldmyr
Honored Contributor

Re: booting problem 4/8 SAN switch

Problem on the I2C bus ouch, doesn't look good at all. Only thing I can think of but it's very far fetched would be to unplug/plug in something in the fc-port.. but it appears that it is rebooting even before the fc ports are initialized so probably won't change anything..

Replace :/