HPE EVA Storage

cascade 2 HP Power Pack FC SAN Switch

 
asshaheen
Advisor

cascade 2 HP Power Pack FC SAN Switch

Dear All,


i have 2 FC san switch i need to be cascaded.


first switch is configure by zone and fos:7.0.0c model HP 8/24 Power Pack FC  SAN Switch

second switch is not configure yet and fos:6.2.0d model HP 8/40 Power Pack FC  SAN Switch


my question, can be cascading  without any problem becouse the FOS is different.

1 REPLY 1
Sheldon Smith
HPE Pro

Re: cascade 2 HP Power Pack FC SAN Switch

A better plan is to update your switch firmware. Both of them.

 

A quick check at HP Storage SPOCK (Single Point of Connectivity Knowledge for HP Storage Products) http://www.hp.com/storage/spock shows the current B-Series FC Switch Connectivity stream.
Both switches are running unsupported versions of firmware.

Upgrade both to 7.4.0a (latest and recommended) and then connect them.

 


Note: While I work for Hewlett-Packard, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo