HPE EVA Storage
1748080 Members
5129 Online
108758 Solutions
New Discussion

Re: configulpoad configdownload -> licenses problem

 
climb_g
New Member

configulpoad configdownload -> licenses problem

Hi! I have two brocade 300 one of them with zone config after configupload and configdownload on the second brocade 300, i get situation - no license. When i cofigupload on second brocade -> config.txt i have found what licenses was rewriten from first brocade. How i can restore my licenses and how correctly move config from one brocade to another?
1 REPLY 1
PP BIJU KRISHNAN
Trusted Contributor

Re: configulpoad configdownload -> licenses problem

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1067498

Licenses are tied to the switch serial number and need to be regenerated.

You will have to contact your vendor if you need to migrate licenses.

If the second switch already had licenses then you can restore them if you have a previous supportsave or supportshow from the switch.

You should always edit certain sections of the config when you download, unless you are downloading the config to the same switch.

Biju Krishnan
TechHelp24