eva 4000 upgrade

 
SOLVED
Go to solution
Nader Zamani
Occasional Contributor

eva 4000 upgrade

Dear All,
I have an eva 4000 disk array that populated with 4 enclosure and I need to add its disk capacity(but can't purchase a new eva).Now my question is it possible adding two san switch(like two brocade 3250) to eva 4000 and creating a loop (as implemented in eva 6000) to adding more disk enclosure.
Best Regards

 

 

P.S. This thread has been moevd from Disk, Disk Arrays (Retired Discussion Board) to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

1 REPLY 1
Uwe Zessin
Honored Contributor
Solution

Re: eva 4000 upgrade

No, you can't put fabric switches in the EVA back-end and the 4000 is limited to 56 disks.

You would need to upgrade your EVA-4000 to an EVA-6000. That means buying two 'EVA loop switches' (do not buy some random loop switches), additional disk enclosures and disk drives, upgrading the EVA-4000 to unlimited CV-EVA capacity (if not done already) and then buying the EVA-4000-to-6000 license upgrade.
.